KITCHEN FAUCET SHK0050
KITCHEN FAUCET SHK0050
Giá sản phẩm : 1590000
The use of environmentally friendly products, especially products that come in direct contact with water sources such as shower, dishwashing faucet, etc., will help reduce the health risks. Son Ha premium shower is manufactured according to European technology and standards on the world’s most advanced technology line, helping to protect consumers’ health.
– Friendly and safe material for health
– Smart hot and cold valve
– Outstanding durability
– Luxury and high-class design
– 5-year warranty.
The use of environmentally friendly products, especially products that come in direct contact with water sources such as shower, dishwashing faucet, etc., will help reduce the health risks. Son Ha premium shower is manufactured according to European technology and standards on the world’s most advanced technology line, helping to protect consumers’ health.
– Friendly and safe material for health
– Smart hot and cold valve
– Outstanding durability
– Luxury and high-class design
– 5-year warranty.
Vui lòng liên hệ với chúng tôi để được tư vấn:
Công ty Cổ phần Quốc tế Sơn Hà
Lô CN1, Cụm CN vừa và nhỏ Từ Liêm, P. Minh Khai, Q. Bắc Từ Liêm, Hà Nội.
Hotline: 1800 6566
INSTALLATION INSTRUCTIONS
- Before installing, clean the inside of the water pipe by flushing water the inside of the pipe.
- Install washbasin faucet:
- Drill holes in the floor or sink with size of Ø35Ø40mm, then pass the flexible hose into an external threaded pipe.
- Next, tighten the flexible hose to the main body facing the front of faucet to install red flexible hose, the back of the faucet to install the blue flexible hose.
- Insert the lower base, the outer threaded pipe into the main body, continue installing the plastic ring into the groove of the base.
- When inserting a soft hose, an external threaded hose through the floor, take a plastic cover of the hose then tighten it, do not screw too tight to avoid causing the floor to crack or warp the basin.
- Connect the two flexible hoses on the main body with the water supply hose on the wall. The red flexible hose connects to the hot water supply pipe, the blue soft hose connects to the cold water pipe. At the ends of two flexible hoses, do not tighten by a wrench.
NOTES FOR INSTALLATION
1. The faucet has been rigorously tested at the laboratory during fabrication. Please do not arbitrarily open it.
2. After installation, check whether the joints are fully connected, if the pipe is leaking.
